Bookmark and Share

You have not viewed any products recently.

 
 

WHIMSICAL WOODBURNED OWL

Owl-design-wood-burning-project

Walnut Hollow® Products

  • #27670 Basswood Country Round Medium
  • #5570 Creative Woodburner Value Pen 
  • #1095 Graphite Transfer Paper

Other Supplies:

  • Oil Pencils
  •  EEEeEraser
  • Foam Brush
  • Paper Towel
  • Pencil or Stylus
  • Pliers
  • Cotton Swab
  • Sandpaper
  • Spray Varnish
  • Masking Tape
  • Wood Sealer
  • Copy of Owl Pattern
  • Pattern

Instructions:

Note: Before beginning project, read through directions and follow all safety precautions found on Creative Woodburner packaging.  Attach Flow Point to hot tool.  Tighten with pliers.  Use tape to secure Stand to hard surface.  Place tool on Stand.  Plug into electric outlet.  Turn switch “on”. Let heat for 4-5 minutes.  Practice on a scrap of wood or on back of Basswood Country Round before beginning project.

  1. Use sandpaper to lightly sand wood.  Remove dust with paper towel.

  2. Center pattern on wood, and tape in place. 

  3. Slide Graphite Transfer Paper under pattern, carbon side down.  Use pencil or stylus to trace pattern lines. 

  4. Use Flow Point to woodburn pattern lines.  When complete, turn switch “off”, unplug tool, and let cool. 

  5. Use eraser to remove any visible graphite lines.

  6. Use foam brush to apply wood sealer to entire wood surface.  Let dry.

  7. Use fine sandpaper to lightly sand to a smooth surface.

  8. Use colored pencils to add color to owl. Blend colors with cotton swab.

  9. Apply 2-3 coats of spray varnish.  Let dry. 

Designed by Janet Wilhelm for Walnut Hollow®