|
Instructions:
1. Before using the Creative HotMarks™, read all instructions and follow all safety precautions. Attach Tapered Point to Creative HotMarks™. Tighten with pliers. Use tape to secure stand to hard surface. Place Creative HotMarks™ on stand. Plug into electric outlet, turn switch "on", and let heat for 4-5 minutes. Practice on a scrap of paper before beginning project to get a feel for the tool. Use a light touch, do not press hard.
2. Center stencil on white cardstock. Use pencil to trace apple. Using the Tapered Point, outline entire apple, stem and leaf with tiny dots. Gently press point onto paper and lift. Continue making dots on inside of apple, leaf and stem. Add more dots to sections that need more shading. Turn tool "off" and let cool. Erase any visible pencil lines.
3. To add color to apple, use red colored pencil and highlight with yellow. Use green on leaf and stem. Highlight with yellow. Refer to photo for placement.
4.Use glue stick to attach white cardstock to red cardstock. Fold black
cardstock in half. Use glue stick to attach red cardstock to top of black cardstock. Use white paint pen to write For My Teacher under picture of apple.
Note: The Creative Versa-Tool™ Tool works best when used with the Walnut Hollow® Tempered Glass Mat. It will ensure that your work area will not be damaged from heat. Use masking tape to secure the Tool holder to the work surface. Attach and tighten with pliers the Point you are going to
use on the Creative Versa-Tool™. Plug Tool in and turn switch "on". It usually takes 3-4 minutes for the Tool to heat. Remember when chaging Points, they are hot and need pliers to remove or attach to the Creative Versa-Tool™. After removing the hot Points, place them in the molded tray of the Tempered Glass Mat to cool.
|
