"Fall Fun" Scrapbook Page
Designed by Walnut Hollow®

Materials:
- Walnut Hollow® Creative HotMarks™ #24422
- Walnut Hollow® HotStamps™ Alphabet Set #25830
- Fall photo
- Glass mat
- Leaf sticker
- Manila tag
- Page Protector and leaf
- (1pc) 8 1/2" x 11" brown construction paper
- (1pc) 4 1/4" x 11" red construction paper
- (1pc) 7" x 8 1/2" gold construction paper
- (1pc)1 3/4" x 6" tan construction paper
Other supplies: Double stick tape, glue stick, fine and medium point black and red markers, metal ruler, pliers, tape

Instructions:
1. Before using the Creative HotMarks™, read all instructions and follow all safety precautions. Attach Tapered Point to Creative HotMarks™. Tighten with pliers. Use tape to secure stand to hard surface. Place Creative HotMarks™ on stand. Plug into electric outlet, turn switch "on", and let heat for 4-5 minutes. Practice making a pouch before beginning project.

2. To make pouch, place leaf between two layers of page protector on a glass mat and seal edges with Tapered Point. Place metal ruler on an angle on edge of stem. Pull Tapered Point along edge of metal ruler, sealing layers of page protector. Go around entire leaf. Turn tool "off" and let cool.

3. Attach letter "F" from the Alphabet HotStamps™ set to Creative HotMarks™. Turn switch "on" and allow to heat. On the tan paper, stamp the letter "F" as shown in photo. Turn tool "off" and allow to cool. Repeat this step using the "A" and "L" HotStamps™ to complete the word "FALL".

4. Refer to photo for placement. Use glue stick to attach red construction paper on left side of brown construction paper. Tear top and bottom of gold construction paper. Use glue stick to attach to red and brown paper. Use glue stick to attach photo to center of gold paper.

5. Use glue stick to attach tan paper as heading of page.Use medium markers to write "fun" next to the word "FALL" on tan paper. Place leaf sticker on left of Fall Fun. Use fine point black marker to write message on manila tag and attach to bottom of page. Use double stick tape to attach leaf pouch to page.

Note: Before you begin, the Creative HotMarks™ tool works best when used with the Walnut Hollow™ Tempered Glass Mat. It will ensure that your work area will not be damaged from heat. Use masking tape to secure the Pen holder to the work surface. Attach and tighten with pliers the Point you are going to use on the Creative HotMarks™. Plug Pen in and turn switch "on". It usually takes 3-4 minutes for the Pen to heat. Remember when changing Points, they are hot and need pliers to remove or attach to the Creative HotMarks™. After removing the hot Points, place them in the molded tray of the Tempered Glass Mat to cool.