|
Instructions:
1. Cut Natural Brown Cardstock into a 12" x 5" rectangle.
2. Score the rectangle, vertically, at 4.5" from the left hand side, and again at 10-1/8". Fold the left side in and the smaller flap on the right side to create the shape of the card.
3. Cut a 1 7/8" x 5" rectangle out of the green cardstock and adhere to the small flap of card (as shown above) using craft glue.
4. Cut a 2.25" square out of the remaining green cardstock. Remove the backing off the Wooden Mini Frame of your choice and adhere the green square to the back of the Mini Frame.
5. Cut a 2.75" square out of the gold paper and glue the mini frame to the center of the gold square. On the back of the gold paper adhere an end of the twine using hot glue. Using glue, attach the entire piece to the card front as shown above.
6. Attach the brown button to the green face of card using hot glue. Wrap the unattached end of the twine around the button to keep the card closed.
7. Embellish the card with an orange leaf sticker placed in the center of the frame.
Note: Before you begin, the Creative HotMarks™ tool works best when used with the Walnut Hollow™ Tempered Glass Mat.
It will ensure that your work area will not be damaged from heat. Use masking tape to secure the Pen holder to the work surface.
Attach and tighten with pliers the Point you are going to use on the Creative HotMarks™. Plug Pen in and turn switch "on".
It usually takes 3-4 minutes for the Pen to heat. Remember when changing Points, they are hot and need pliers to remove or attach to the Creative HotMarks™.
After removing the hot Points, place them in the molded tray of the Tempered Glass Mat to cool.
|
