|
Instructions:
1. Attach the Universal Point to the Creative HotMarks™ and tighten with a pliers. Turn switch "on" to heat.
2. Using a pencil, trace the stencil design onto one side of the tag. Using the Universal Point, burn the tree design into the tag on the pencil line. IF you have a metal stencil, you can burn directly onto the tag without tracing the design first.
4. Fill the inside of the design with glue and decorate with glitter.
5. Attach the "T" HotStamp™ to the Creative HotMarks™ and tighten with pliers. When hot, stamp on tag as shown above. Repeat with letters, O, F, R, and M to spell out "TO" and "FROM" on the backside of tag.
|
